Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Fridge Diagnostic Info
Service Diagnostics Mode allows you to recognize the firmware as well as software versions, test condition of “model particular” system elements as well as sensing units, and alter state of components where appropriate (i.e.– compressor on/off, etc.).
Enabling Solution Mode: To allow Solution Setting, press and hold the “WARMER” button while pushing the “COLDER” switch four times within 5 seconds.
After entering Solution Setting, the initial number that you will see indicates the software model number for the particular unit you are servicing. For instance, if you are servicing a 24 inch wine rack (DFUW, DUWC, VUWC), the very first number you will see is 11. See chart listed below for corresponding version and also software referral.
The second number you will certainly see suggests the software version launch. For example, if you see 44 on the screen panel it shows software variation 4.4.
Diagnostics:
While in Service Mode, press the “COLLECTION” switch to tip via Examinations 0-9. The initial figure of the display screen will certainly show the examination number. The 2nd number indicates the existing state of each element under test and is displayed as “1” being ON, CLOSED, or SHORTED and “0” being OFF or OPEN. Examinations 0 and also 1 expose an open or shorted problem detected at the sensing unit inputs. Tests 2 through 6 enable you to turn lots ON with the “WARMER” button and OFF with the “COLDER” switch. Examinations 7 through 9 confirm state adjustment of the door changes and/or magnetic reed sensing unit. The element tests available are defined in Offered Part Examinations graph.
SOUND | POSSIBLE CAUSE | SOLUTION |
Humming | Ice maker is in the ‘on’ position without water connection | Stop sound by raising ice maker arm to OFF position see page 3 |