Model | Description | Software Model Number |
DFUW, DUWC, VUWC | 24 inch Wine Cellar | 11 |
DFUR, DUAR, VUAR | 24 inch Beverage Center | 21 |
DFRD, DURD, VURD | 24 inch Refrigerated Drawers | 16 |
Viking Refrigerator Diagnostic Information
Solution Diagnostics Setting allows you to determine the firmware and software program versions, examination status of “model details” system elements and also sensors, and also alter state of components where applicable (i.e.– compressor on/off, and so on.).
Enabling Solution Mode: To allow Solution Mode, press and hold the “WARMER” switch while pressing the “COLDER” button four times within 5 secs.
After going into Service Mode, the initial number that you will certainly see shows the software version number for the particular system you are servicing. For instance, if you are servicing a 24 inch wine cellar (DFUW, DUWC, VUWC), the first number you will see is 11. See chart below for equivalent design as well as software application referral.
The 2nd number you will certainly see indicates the software program variation release. For instance, if you see 44 on the display panel it suggests software application variation 4.4.
Diagnostics:
While in Service Setting, press the “COLLECTION” switch to tip with Examinations 0-9. The initial digit of the display will show the test number. The second figure suggests the present state of each component under examination and also is presented as “1” being ON, CLOSED, or SHORTED and also “0” being OFF or OPEN. Tests 0 and 1 expose an open or shorted problem identified at the sensing unit inputs. Examinations 2 with 6 permit you to transform loads ON with the “WARMER” switch and also OFF with the “COLDER” switch. Tests 7 via 9 validate state modification of the door switches and/or magnetic reed sensor. The part examinations available are explained in Available Element Tests chart.
SOUND | POSSIBLE CAUSE | SOLUTION |
Clicking | Freezer control clicks when starting or stopping compressor. | Normal operation |